Bobcat T590 Compact Track Loader
The Bobcat® T590 Compact Track Loader is designed to bring you high performance in a compact and stable package. Its low ground pressure allows you to work in rough conditions or where you need to minimize ground disturbance – while still providing heavy load-carrying capacity and strong traction. It’s your perfect solution, the first machine on site and the last to leave!
Compact Track Loader Rental
If you need to move some earth or debris you’ll find no easier way than to utilize a compact track loader. A skid-steer is more effective on softer ground like mud or loose gravel. A track loader is much more effective on harder surfaces like pavement or concrete. The tires allow you to operate on these hard surfaces without damaging the ground like a metal track would for instance. The low-profile bucket makes for easy operation with a very clear view.
Safety & Training – Bobcat T590
It is very important that you are properly trained when using this equipment. You are required to wear all the manufacturer’s recommended safety equipment, review all safe operation manuals and decals, and observe all safety precautions when utilizing tools and operating equipment. Learn more about renting our Bobcat compact excavator.
Operator/User assumes all responsibility for the use, care, and inspection of this equipment and your Personal Protective Equipment.
Track Loader Safety Requirements
- Eye Protection
- Hard Hat
- Safety Shoes
General | |
---|---|
Manufacturer | Bobcat |
Model | T590 Standard |
Category | Loaders |
Subcategory | Compact Track Loaders |
Condition | Other |
Stock Number | rental T590 TEC |
Transmission Type | Infinite, 3 Range Hydrostatic (Servo control valve with Electric sol.) |
Blade Tip Speed Max | 9,000 ft/min |
Brake Type | Wet Multi Disc |
Max Wheel Tip Speed | 2,985 ft/min |
Mower Blade Tip Speed | 18,770 ft/min |
Recommended Drum Speed | 20 rpm |
Recommended Drum Speed At | 11 gal/min |
Tip Speed At22gpm | 3,256 ft/min |
Operational | |
---|---|
Tipping Load | 6000 lb |
Dig Depth | 62 in |
Auxilliary High Flow | 26.7 gal/min |
Auxilliary Standard Flow | 17.1 gal/min |
Ground Pressure Rubber | 5.1 psi |
Height To Bucket Hinge Pin | 119 in |
Length Of Track On Ground | 54.1 in |
Operating Capacity | 50% of Tip: 3000 lb |
Operating Weight | 7822 lb |
Optional Track Width | 15.8 in |
Rated Operating Capacity Sae | 2,100 lb |
Reach At Maximum Height | 34.9 in |
System Relief At Quick Couplers | 3,500 psi |
Track Width | 12.6 in |
Travel Speed | 7.1 mph |
Travel Speed Two Speed Option | 10.4 mph |
Turning Radius | 80 in |
Pto Hp | 48.3 hp |
Arm Digging Force | 8,253 lbf |
Auxilliary Pressure | 3,045 psi |
Boom Swing Left | 64° |
Boom Swing Right | 61° |
Bucket Diggin Force | 16,269 lbf |
Cargo Box Bed Load Capacity | 2000 lb |
Cargo Box Bed Load Height | 38.2 in |
Cargo Box Height | 10 in |
Cargo Box Length | 56 in |
Cargo Box Maximum Load | 2000 lb |
Cargo Box Volume | 18 ft³ |
Cargo Box Width | 51 in |
Dig Depth Without Extensions | 72 in |
Dig Force Bucket | 2,200 lbf |
Dig Force Dipper | 968 lbf |
Dig Width | 914.4 mm |
Grinder Reach At Ground Level | 74 in |
Ground Clearance | 9.2 in |
Lift Capacity | 1775 lb 24” behind lift point |
Lift Capacity At Behind Lift Point | 2,908 lb |
Lift Capacitymm Ahead Of Bkt Pivot | 2,324 lb |
Lift Radius | 118 in |
Machine Rated Capacity | 2200 lb |
Max Dig Depth | 15.5 ft |
Max Dump Height | 16.5 ft |
Max Lift | 173 mm |
Max Reach At Ground Level | 23.6 ft |
Max Travel Speed | 17 mph |
Maximum Dig Depth | 76.2 in |
Maximum Operating Pressure | 3,300 psi |
Mid Pto Rpm | 2000 |
Operating Weight Empty | 1,300 lb |
Operating Weight Full | 1,425 lb |
Operating Weight Less Bit | 454 lb |
Operating Weight V | 1113 lb |
Operating Weight With Teeth V | 1,177 lb |
Operating Weight Withfrontgate | 3,065 lb |
Operating Weight Without Teeth V | 1,213 lb |
Operating Weightwith Pinon Mount | 876 lb |
Operating Weightwith X Change Mount | 881 lb |
Outside Turning Diameter | 210 in |
Point Hitch | Category 2 |
Power Take Off Horsepower | 25 hp |
Pt Lift Control Type | Position with Draft Control |
Pump Capacity | 12 gal/min |
Rated Lift Capacity | 9754 lb |
Rear Pto Rpm | 540 |
Rear Pto System | Independent |
Rear Power Take Off System | 540 |
Standard Boom Length | 79 in |
Three Point Hitch | Category 1 |
Total Vehicle Rated Capacity | 4200 lb |
Travel Speed High | 2.9 mph |
Travel Speed Low | 1.7 mph |
Travel Speed Reverse | 2.9 mph |
Turning Radius All Wheel Steer Mode | 151.5 in |
Dimensions | |
Length | 133 in |
Height | 77.8 in |
Width | 67 in |
Wheelbase | 52.9 in |
Ground Clearance | 7.2 in |
Height With Operator Cab | 77.8 in |
Length With Standard Bucket | 133 in |
Length Without Attachment | 104.6 in |
Width With Bucket | 68 in |
Bed Height From Ground | 38.2 in |
Blade Height | 432 mm |
Bolster Width | 1468 mm |
Box Blade Moldboard Width | 84 in |
Bucket Capacity | 14.3 ft3 |
Capacity | 6.9 ft3 |
Capacity Heaped | 87.9 ft3 |
Capacity Struck | 67.5 ft3 |
Clamp Width | 15.9 in |
Closed Height | 34.1 in |
Closed Length | 49.1 in |
Cutting Edge Length | 6 in |
Cutting Edge Reversible Length | 6 in |
Cutting Edge Reversible Width | 0.6 in |
Cutting Edge Width | 79 in |
Cutting Width | 66 in |
Discharge Chute Height | 93.3 in |
Drum Diameter Padded | 26 in |
Drum Width | 80 in |
Drum Width Max | 40 in |
Feed Table Height | 25.4 in |
Fork Width | 4 in |
Frame Weight | 893 lb |
Frame Width Std Equipment | 56.2 in |
Grapple Width | 82.5 in |
Height Hammer Fully Raised | 74 in |
Height V | 37.6 in |
Height With Blade Extension | 32.8 in |
Hopper Capacity | 10 ft3 |
Intake Height | 33.8 in |
Iso Heaped Capacity V | 88.99 ft3 |
Iso Struck Capacity V | 0.38 ft3 |
Length V | 46.4 in |
Maximum Aggregate Size | 1.5 in |
Maximum Cutting Capacity | 4 in |
Maximum Cutting Height | 32 in |
Moldboard Cutting Edge Reversible Height | 6 in |
Moldboard Cutting Edge Reversible Width | 0.5 in |
Open Height | 51.8 in |
Open Length | 49.1 in |
Operating Weight | 18,977 lb |
Overall Attachment Width | 89.9 in |
Overall Lenght In Travel Position | 246 in |
Pallet Fork Width | 4 in |
Sweep Width | 84 in |
Sweep Width Fully Angled | 65.5 in |
Sweep Width Fully Angled At | 25deg |
Sweep Width Straight | 70 in |
Transport Width | 68.8 in |
Vertical Pumping Height | 50 ft |
Weight Class | 8.6 t |
Weight Of Hammer | 1,140 lb |
Width Fully Angled | 76 in |
Width V | 91.8 in |
Widths Available Max | 8 in |
Widths Available Min | 6 in |
Working Width | 72 in |
Working Width Angled Blade | 85 in |
Working Width Fully Angled | 83 in |
Working Width Scoop Blade | 84 in |
Working Width Straight Blade | 98 in |
Working Width V Blade | 85.5 in |
Contact Us